Angstrom Advaned Hydrogen Generating Plant by PSA with H2 Purifying System

Angstrom Advanced Inc. Hydrogen Generating Plant by PSA with H2 Purifying System 

Our instruments and plants here at Angstrom Advanced have been delivered to many renowned organizations

For more information please call Angstrom Advanced at: 781.519.4765

Request an Estimate

Angstrom Advanced Pressure Swing Adsorption (PSA) is used to separate hydrogen gas from other gases by feeding the gas under a certain pressure. This separation process occurs in an adsorption tower and is advantageous in its low cost, low capacity, minimal maintenance requirements and user-friendly interface. The H2 Purifying System removes oxygen from hydrogen via a catalyst to obtain high purity H2 after adsorption and drying through the dust filter. The system can remove oxygen down to levels of 1ppm. Through one step of purification, the purity of the hydrogen generated can reach between 99.999~99.9999% and the dew point can be lower than -70°C; Through a second purification step, impurities can be lowered down to less than 0.1ppm and dew point can be lowered to -90°C.

Specifications
Gas Treatment	10-5000NM3/H
Pressure	≤0.8Mpa
H2 purity %	>98-99.999%
Dew Point	≤-60°C
Oxygen Content	≤1ppm

Angstrom Advanced: AFM Scanners

The sample is placed on the Piezo Electric Scanner and is scanned under a stationary cantilever tip (there are AFM models in which the tip is scanned over a stationary sample). The PES is a very precise component and is able to accurately move the sample through a scan (a back and forth raster pattern) of only a few hundred nanometers. Angstrom Advanced AFM Scanners are made of piezo tubes and are steady held in the SPM base. Voltage applied to piezoelectric scanner tube housed inside moves sample precise increments back and forth. Size at the bottom indicates maximum size scan possible, each scanner has its own specified parameters.

Samples are held in place on the scanner with a removable cap. Piezo scanner can extend and retract 3-dimentionally based on the applied X, Y and Z voltage placed across the individual elements.

Angstrom Advanced Renewable Power Generating System Introduction

  Because of its unique design in the electric system and controlling capability, Angstrom Renewable Power Generating System can adapt 100% fluctuating power from wind turbines/solar panels, and realize 100% utilization of renewable power during the hydrogen production.

    Currently, this patented technology can be applied in 2NM3 – 1000NM3/Hour hydrogen generating systems, and therefore Angstrom Advanced Inc. could provide a variety of renewable energy generating systems, customized for different clients. This technology represents a bright future of massive production and utilization of hydrogen in the 21st century.

Distributed Energy Article about Angstrom Advanced Inc

Feb 25th 2013 Boston, United States

The leading clean energy magazine "Distributed Energy" has recently published an article about the cutting-edge technology Angstrom Advanced has developed to specially serve the Distributed Renewable Energy market: "Hydrogen is a very valuable alternative to fossil fuel for distributed energy generation, delivering a high-powered solution with minimal environmental and safety concerns. Green businesses, telecomm providers, governments, and renewable energy advocates can now produce on-demand energy for their assets, at minimal cost and using commercially available equipment. This article will look at the benefits associated with hydrogen and fuel cell energy systems compared to fossil fuel and chemical alternatives as well as the inherent costs associated with a fuel cell on-demand generator. This analysis will show that it is not only technically feasible to use hydrogen for on-demand energy in certain, but also that it can be more economic than the alternatives. Diesel generators are valuable when used only for applications that have short run times (less than eight hours per day) and where they are in proximity to a low-cost fuel source. For longer run times, and when used in more remote and extreme conditions, renewable hydrogen generators are an ideal solution for providing on-demand energy...

Click here to read more about this article

Angstrom Advanced is now providing Hydrogen Fueling Stations

Boston, United States

Angstrom Advanced Inc now has the capability to provide the 50Kg/hour production capacity Hydrogen Fueling Stations, after collaborating with leading research organizations and national laboratories in the United States for years. This technology has made the Hydrogen Fueling Station ready for commercial operation around the world, and we are only waiting for the auto makers, such as Toyota, Honda, Daimler, Nissan, Audi and GM to release Hydrogen Fuel Cell Vehicles in the next a few years.

Not only can Angstrom supply commercial scale Hydrogen Fueling Stations, but we also have integrated residential scale hydrogen fueling machines, which allows every family to enjoy using 100% clean energy for their gas, heating and electricity needs at home.